Product Description
Pressure Casting Steering Gear Parts Chain with ISO 9001:2008
Product Description
When the chain forms into a ring, it can be utilized as a conveyor chain for heavy loads. Our drop forged chain is often found on the conveying equipment and suspension equipment, automobile, food processing, and steelmaking industries.
Our company is the lagrest drop forged chain manufacturer. The main products are standard drop forget chain.
| Name | Forging parameters | Weight (KG) |
Single point load (KG) | Allowable load (KG) | Limit load (KG) |
||||||
| P | H | A | C | D | F | G | |||||
| X348-1 | 83 | 42 | 105 | 40 | 50 | 48 | 10 | 1.35 | 100 | 1100 | 1800 |
| X348-11 | 85 | 45 | 93 | 40 | 60 | 48 | 10 | 1.35 | 100 | 1100 | 1800 |
| X458 | 95 | 44 | 120 | 54.5 | 50 | 54 | 10 | 2.5 | 200 | 1800 | 3600 |
View more products,please click here…
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery Parts |
|---|---|
| Machining: | Pressure Casting |
| Material: | Iron |
| Surface Treatment: | Polishing |
| Design: | 2D |
| Casting Tolerance: | +/-0.2mm |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do you calculate the required horsepower for a gear chain drive?
To calculate the required horsepower for a gear chain drive, you need to consider several factors:
1. Speed of the Drive:
– Determine the desired speed of the gear chain drive in revolutions per minute (RPM).
2. Torque Requirement:
– Calculate the torque required by the load or driven equipment. Torque is typically given in pound-feet (lb-ft) or Newton-meters (Nm).
3. Efficiency of the Drive:
– Determine the efficiency of the gear chain drive system. This is usually expressed as a decimal value ranging from 0 to 1.
4. Conversion Factor:
– Determine the appropriate conversion factor to convert the torque units to pound-feet per minute (lb-ft/min) or Newton-meters per minute (Nm/min).
Once you have these values, you can use the following formula to calculate the required horsepower:
Horsepower = (Torque x RPM) / (5252 x Efficiency)
Make sure to use consistent units throughout the calculation.
It is important to note that this calculation provides an estimate of the required horsepower. Actual operating conditions, such as friction, load variations, and other factors, may affect the actual horsepower requirements. Consulting with a qualified engineer or using manufacturer-provided data is recommended for accurate and specific calculations.
What lubrication is recommended for a gear chain?
Proper lubrication is essential for the smooth and efficient operation of a gear chain. The lubricant used for a gear chain should have certain properties to ensure optimal performance and longevity. The following factors should be considered when selecting a lubricant for a gear chain:
1. Viscosity: The lubricant should have the appropriate viscosity to provide sufficient film thickness between the gear teeth and minimize friction and wear. The viscosity should be selected based on the operating conditions, such as speed, temperature, and load.
2. Extreme pressure (EP) additives: Gear chains often operate under high loads and pressures. The lubricant should contain EP additives that provide enhanced protection against metal-to-metal contact and prevent gear tooth damage.
3. Anti-wear properties: The lubricant should have excellent anti-wear properties to minimize wear on gear teeth and extend the chain’s service life. It should form a protective film on the surfaces to reduce friction and prevent metal-to-metal contact.
4. Corrosion protection: Gear chains may be exposed to moisture or corrosive environments. The lubricant should offer good corrosion protection to prevent rust and corrosion on the gear surfaces and chain components.
5. Compatibility: The lubricant should be compatible with the materials used in the gear chain, such as metals, plastics, or elastomers. It should not cause any adverse chemical reactions or damage to the chain components.
It is recommended to consult the gear chain manufacturer or a lubrication specialist to determine the specific lubricant requirements for your gear chain system. They can provide guidance on selecting the right lubricant based on the operating conditions, application requirements, and the type of gear chain used.
What are the main components of a gear chain?
A gear chain consists of several key components that work together to transmit power and rotational motion efficiently. The main components of a gear chain include:
– Gears: Gears are the primary components of a gear chain. They consist of toothed wheels with different sizes and profiles. The gears mesh together to transfer rotational motion and torque from one gear to another.
– Chain Links: Chain links are the elements that connect the gears in a gear chain. They typically have teeth or pins that engage with the teeth of the gears, creating a positive engagement.
– Pins and Bushings: Pins and bushings are cylindrical components that connect the chain links. The pins fit into the bushings, allowing the chain links to rotate smoothly and transmit motion between the gears.
– Roller Bearings: Roller bearings are often used in gear chains to reduce friction between the pins and bushings. They enable smooth rotation and help distribute the load evenly along the chain.
– Tensioners and Guides: Tensioners and guides are additional components used in some gear chain systems. Tensioners help maintain proper chain tension by adjusting the distance between the gears, while guides ensure the chain stays on the correct path and prevents excessive movement or misalignment.
– Lubrication: Proper lubrication is essential for the smooth operation and longevity of a gear chain. Lubricants reduce friction, dissipate heat, and protect against wear and corrosion.
These components work together to transmit rotational motion and torque from one gear to another, enabling power transmission in various mechanical systems.
editor by CX 2024-04-22